teknofibra

TeknoFibra

TeknoFibra Heat Material

TeknoFibra is a 21st Century heat management material and raises the standard in motorsport heat protection. This unique material is currently offered in three sheet variations and tubing. 2mm & 4mm flexible and 4mm Contact.

 

The flexible material is offered in 1m x 0.75m sheet or can be profiled to a customers requirement; the flexible material is capable of managing temperatures up to 800'C but is required to have a 3mm - 5mm air gap between heat source and mounting point for the material. The Contact material is offered in a 0.62m x 0.24m and is capable of managing temperatures up to 1000'C,

!

Teknofibra Flexible

Teknofibra flexible heat material, this is the 2mm sheet measuring at 1m x 0.75m. The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 700'C only transfering through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.

Teknofibra Flexible

Teknofibra flexible heat material, this is the 4mm sheet measuring at 1m x 0.75m. The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 800'C only transfering through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.

Teknofibra Contact

TeknoFibra Contact sheet dimensions are 0.62m x 0.27m. This is the newest in the range of the Teknofibra brand; Teknofibra contact can be in direct contact with the heat source if required and is able to manage temperatures up to 1000'C only transfering through 54'C on the reverse of the panel it is attached to. Again adhesive backed which is able to manage temperatures up to 250'C (more than the material transmits).